These slick bottom coatings are used on the hulls of driftboats, jon boats, duck boats and airboats. wetlander is a waterbased epoxy. easy to apply by roller or spray, and ships with no hazardous. Wetlander is a very slick and durable boat bottom coating for shallow water boats, skiffs, and all flat bottom jon boats. and, it has great adhesion to both aluminum and fiberglass. and, it has great adhesion to both aluminum and fiberglass.. The initial positioning of the boat on the sawhorses isn't important, although it may be easier if the bottom of the boat is on the sawhorses, with the inside area of the boat facing up. sand the boat completely. this step is necessary only if you're repainting an aluminum boat that had a previous coat of paint..
12' duck boat - aluminum boat by silver streak aluminum boats.
10 feet aluminum rigid hull inflatable boat | innovocean
9 feet aluminum rigid hull inflatable boat | innovocean marine
A. if you want to paint an aluminum boat you first have to use a aluminum oxide primer. make sure the boat is totally clean before priming (lightly sand the boat) then use a tack cloth [linked by editor to product info at amazon] and rub the boat down. then prime it with the aluminum oxide primer.. If you do not have any coatings at all on the bottom of the boat, we suggest to sand the hull with 80 grit and then apply tuff stuff high build epoxy. it is a water tight barrier coat designed for use under the waterline and with aluminum hulls.. When you need to resurface your boat, get with spray-lining™ coatings. our kits are for any standard v-hull or flat bottom hull. for mako, wellcraft, bayliner, boston whaler, sea nymph, proline and other manufacturers..
